Sold out
ADATA 256GB Ultimate SU650 M.2 SATA SSD, M.2 2280, SATA3, 3D NAND, R/W 550/500 MB/s, 80K/60K IOPS
Original price was: £15.56.£14.63Current price is: £14.63.
DrayTek VigorAP912C WLAN Access Point
£99.00 Inc VAT
DrayTek Vigor2832 ADSL Router/Firewall
DrayTek Vigor2832 ADSL Router/Firewall Network & Management Features 802.1q Tagged, Wireless & Port Based VLAN The Vigor 2832 features a hugely flexible VLAN system. In its simplest form, each of the four Gigabit LAN ports can be isolated
Out of stock
DrayTek Vigor2832 ADSL Router/Firewall
Network & Management Features
802.1q Tagged, Wireless & Port Based VLAN
The Vigor 2832 features a hugely flexible VLAN system. In its simplest form, each of the four Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated. For more sophisticated scenarios, the Vigor 2832 includes tagged VLANs (802.1q) whereby data is marked with a VLAN identifier. This identifier can be read by an onward Ethernet switch and directed to specific ports or just passed to the LAN for specific VLAN clients to pick up; priorities can also be applied for LAN-side QoS.
The VLANs can be tied to any other individual 4 RJ45 ports on the front of the Vigor 2832, or, by the use of VLAN tagging, you can uplink to a larger switch and retain the separation for larger groups. The VLANs can each be tied into each of the different IP subnets that the router may also be operating, to provide even more isolation.
On the Wireless-equipped models (Vigor2832n) each of the wireless SSIDs can also be grouped within one of the VLANs. Each individual private subnet can be independent (isolated) or common (able to communicate with each other). This is ideal for departmental or multi-occupancy applications.
To learn more about the DrayTek’s Vigor 2832’s VLAN capabilities, click here.
IPv6 – Next Generation Internet Routing
The Vigor 2832 supports IPv6 – the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2832 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers. To learn all about IPv6, you can get our detailed guide to IPv6 here.
IPv6 on the Vigor 2832 series provides the following features:
- Operation on any one of the WAN ports (ADSL, Ethernet or 3G/4G)
- Connectivity to direct native IPv6 ISPs
- Built-in tunneling to 3rd party IPv6 brokers
supporting TSPC or AICCU methods - Default stateful firewall for all IPv6 LAN Clients/Devices
- DHCPv6 Client or Static IPv6 Client
- DHCPv6 & RADVD for client configuration
- IP Filtering Rules
- QoS for IPv6 with DiffServ
- Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List
- Simultaneous (concurrent) operation with IPv4 (“Dual-Stack”)
- Other router features are available on IPv4 only currently
User Management & Authentication
Up to 200 User Profiles:
Status Information presented to Users:
The Vigor 2832 series has built-in user management which allows you to provide internet access to users based on their own unique login (stored in the router, or on an external Radius server). Accounts can be restricted by schedules or maximum usage times but also any other aspect of the firewall or content filtering can be applied on a user-by-user basis.
For example, a sales department might not be allowed access to social networking sites except at lunch time, or in a school, teachers and staff have more access permitted than pupils. This works with Wireless (WiFi) clients too so is ideal for guest or temporary access as users can be isolated from the rest of the company LAN.
To learn more about the Vigor 2832 series User Management capabilities, click here.
User Status & Management:
USB Features
Network Attached Storage (NAS)
The Vigor 2832’s USB port can also be used to add storage memory to the unit in the form of a USB memory key (as shown right) or for higher capacity a USB hard drive (normally requires its own power).
The Vigor 2832 then provides FTP access file uploading/downloading which can be from the local LAN or from anywhere on the Internet – ideal for a simple to deploy file depository. Access can be ‘public’ or using usernames and passwords, each of which can have their own directories and/or file access rights. As well as FTP, file sharing is available as a Windows ‘network drive’. You can also use Windows Explorer to view and access the contents of the USB drive.
If you do have a USB memory key connected, you can also have the router save it’s system logs (syslog) to that memory instead of to a connecting computer; useful for technical personnel (SysAdmins).
The NAS facility uses any FAT32 formatted device (includes USB memory sticks, USB hard drives etc.) and supports a transfer rate of 12Mb/s so ideal for occasional or remote storage. For larger hard drives, you may need a separate power supply or powered USB hub.
USB Thermometer
With the installation of the optional USB thermometer, the Vigor 2832 can take continuous temperature readings from the vicinity of the router. This USB thermometer connects to the router’s USB port either directly or placed nearby using the supplied 1 Metre USB extension cable.
You can log into the router at any time and see the current temperature and the previous 24-hour’s high/low as well as graphs. You can set thresholds so that if it gets too hot or too cold at the sensor, you’ll receive an email or SMS (text message).
Typical applications will be to report the temperature in your comms/IT cabinet or room, but also the general office temperature, depending on the placement of the temperature ‘dongle’. USB typically allows a maximum cable length of up to 3M.
| Weight | 0.52 kg |
|---|---|
| Brand |
Draytek |
Only logged in customers who have purchased this product may leave a review.
Vigor 2832 ADSL Series
The Vigor 2832 Series comes in several different models depending on the features required. Please double check when ordering that you have selected the correct product and a product intended for the correct region/network.
The EAN is a barcode number which identifies the unique specific product type. It is separate to the product serial number which is unique to each product. The EAN will also appear on your product box when you receive it so you can double check that you have been sent the right product.
These product codes are for UK/Irish products only. Please check with your local DrayTek office for the correct part nos. for your region if you are not in the UK/IE to ensure that you get the correct hardware, firmware and local support/warranty.
| Product Code | EAN | Product Description | Notes |
|---|---|---|---|
| V2832-K | 4716779076509 | Vigor 2832 (UK Version) | Non-wireless model |
| V2832N-K | 4716779076820 | Vigor 2832n (UK Version) | 802.11n Wireless |
Technical Specification
Physical Interfaces
- LAN Ports (Switch)
- 4 X Gigabit Ethernet (1000Mb/s) Ports
- Port-Based VLAN (Inclusive/Exclusive Groups)
- 802.1q VLAN Tagging
- USB Ports:
- 2x USB 2.0 ports for 3G/4G Modem, Printer, USB storage or USB temperature sensor
- WAN Ports:
- WAN1 : ADSL, RJ11
- WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet
- WAN3 : USB Port for 3G/4G Cellular Modem
- WAN4 : USB Port for 3G/4G Cellular Modem
- LAN Ports (Switch)
Performance
- Firewall: Up to 300Mb/s
- IPSec VPN: Up to 50Mb/s
ADSL Compatibility
- ANSI T1.413 Issue2
- ITU-T G.992.1 G.dmt (ADSL)
- ITU-T G.992.2 G.lite
- ITU-T G.992.3 ADSL2
- ITU-T G.992.5 ADSL2+
- Annex L (READSL)
- Annex A
- Annex M
- ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
- DSL Forum : TR-048/67 & TR-100
Load Balance/Failover Features
- Outbound Policy-Based Load-Balance
- WAN Connection Fail-over
- BoD (Bandwidth on Demand)
Wireless LAN Features ('n' Models Only)
- 802.11n with backward support for 802.11b/g
- 2.4GHz operating frequency (UK channels 1-13)
- Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
- Optional Higher Gain or directional aerials available - Click Here.
- Active Client list in Web Interface
- Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
- 64/128-bit WEP Encryption
- WPA/WPA2 Encryption
- Switchable Hidden SSID
- Restricted access list for clients (by MAC address)
- Time Scheduling (WLAN can be disabled at certain times of day)
- Access Point Discovery
- WDS (Wireless Distribution system) for WLAN Bridging and Repeating
- 802.1x Radius Authentication
- Wireless VLAN
- Wireless Rate-Control
- Automatic Power Management
- 802.11e WMM (Wi-Fi Multimedia)
Firewall & Security Features
- CSM (Content Security Management):
- URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
- Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
- Prevent accessing of web sites by using their direct IP address (thus URLs only)
- Blocking automatic download of Java applets and ActiveX controls
- Blocking of web site cookies
- Block http downloads of file types :
- Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
- Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
- Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
- Time Schedules for enabling/disabling the restrictions
- Block popular P2P (Peer-to-Peer) file sharing programs
- Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
- Multi-NAT, DMZ Host
- Port Redirection and Open Port Configuration
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
- CSM (Content Security Management):
Bandwidth Management
- QoS (For devices in the NAT subnet according to source or destination IP)
- Guaranteed Bandwidth for VoIP
- Class-based Bandwidth Guarantee by User-Defined Traffic Categories
- Layer 2&3 (802.1p & TOS/DCSP)
- DiffServ Code Point Classifying
- 4-level Priority for each Direction (Inbound / Outbound)
- Bandwidth Borrowed
- Temporary (5 minute) Quick Blocking of any LAN Client
- Bandwidth / Session Limitation
Network/Router Management
- Web-Based User Interface (HTTP / HTTPS)
- CLI ( Command Line Interface ) / Telnet / SSH
- Administration Access Control
- Configuration Backup / Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP / FTP
- Logging via Syslog
- SNMP v3 Management with MIB-II
- TR-069
- TR-104
VPN Facilities
- Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
- Tunnelling Protocols:
- PPTP
- IPSec
- L2TP
- L2TP over IPSec
- DrayTek SSL
- IPSec Features:
- Internet Key Exchange : IKEv1 (Main and Aggressive mode) & IKEv2 NEW!
- Security Protocols : AH mode, ESP mode
- DiffieHelman (DH) Groups:
- IKEv1 : 1,2,5,14
- IKEv2 : 1,2,5,14,19,20,21
- Encryption:
- DES / 3DES (168bits)
- AES (128/192/256bits) - Hardware-Accelerated
- Authentication - Hardware-Accelerated:
- MD5
- SHA-1
- SHA-256
- IKE Authentication : Pre-shared Key or X.509 Digital Signature
- DHCP over IPSec
- NAT-Traversal (NAT-T)
- Dead Peer Detection (DPD)
- SSL VPN for teleworkers - Up to 16 simultaneous users. Proxy or tunnel
- LAN-to-LAN & Teleworker-to-LAN connectivity
- MOTP (Mobile One Time Password) for two factor authentication (2FA)
- Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
- VPN Pass-Through
Network Features
- DHCP Client / Relay / Server
- DHCP Option 66 support
- Dynamic DNS
- LAN DNS (supports CNAME)
- NTP Client (Synchronise Router Time)
- Call Scheduling (Enable/Trigger Internet Access by Time)
- RADIUS Client
- UPnP Support
Routing Protocols
- Static Routing
- RIP V2
Vigor 2832 ATM Protocols (DSL)
- RFC-2684/RFC-1483 Multiple Protocol over AAL5
- RFC-2516 PPP over Ethernet
- RFC-2364 PPP over AAL5
- PPPoE pass through LAN/WLAN
- PPPoE/PPPoA Relay
- Transparent bridge for MPoA
- Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
- Support for RFC4638 for MTU up to 1500
WAN Protocols (Ethernet)
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA
Operating Requirements
- Rack Mountable (Optional Vigor RM1 mounting bracket required)
- Wall Mountable
- Temperature Operating : 0 °C ~ 45 °C
- Storage : -25 °C ~ 70 °C
- Humidity 10% ~ 90% (non-condensing)
- Power Consumption: 18 Watt Max.
- Dimensions: L240.96 * W165.07 * H43.96 ( mm )
- Operating Power: DC 12V (via external PSU, supplied)
- Warranty
- Two (2) Year Manufacturer's RTB
- Optional VigorCare Enhanced Warranty Available
- VigorCare B3 3 Year Subscription: VCARE-B3
- VigorCare B5 5 Year Subscription: VCARE-B5
- Power Requirements : 220-240VAC
1 review for DrayTek Vigor2832 ADSL Router/Firewall
There are no reviews yet.