DrayTek VigorSwitch P2280X 28 Port PoE
£575.00 Inc VAT
DrayTek VigorSwitch G2100
£129.00 Inc VAT
DrayTek POE600 POE injector for 918RPD
£59.00 Inc VAT
DrayTek POE600 POE injector for 918RPD DrayTek VigorPoE-600 – High Power PoE Injector for VigorAP 918RPD The VigorAP 918RPD and VigorAP 920RPD outdoor access points have a secondary LAN port that provides PoE Output (PoE-PSE), to power an additional PoE
20 in stock
DrayTek POE600 POE injector for 918RPD
DrayTek VigorPoE-600 – High Power PoE Injector for VigorAP 918RPD
The VigorAP 918RPD and VigorAP 920RPD outdoor access points have a secondary LAN port that provides PoE Output (PoE-PSE), to power an additional PoE device through a single cable run.
Use the DrayTek VigorPoE-600 High-Power PoE Injector to power additional devices through the VigorAP 918RPD’s secondary LAN port.
This powers the VigorAP 918RPD and provides up to 16 watts power output to the device connected to the VigorAP’s PoE Out port, over a 100 meter CAT5e/CAT6 cable run. Connect a camera near to the VigorAP, or daisy-chain an additional AP through the one cable.
Please note, this POE Injector is proprietary and is for use with the DrayTek VigorAP 918RPD/920RPD only.
The VigorPoE-600 is not directly compatible with 802.3af / at PoE products.
| Weight | 0.24 kg |
|---|---|
| Dimensions | 0.13 × 0.1 cm |
| Brand |
Draytek |
Only logged in customers who have purchased this product may leave a review.
DrayTek VigorPoE 600 Specifications
| Product Code | EAN | Description |
|---|---|---|
| POE600-K | 4712909129046 | VigorPoE 600 High-Power PoE Injector |
Technical Specification (UK Hardware Spec.)
Physical Interfaces/Controls
- 1 x Gigabit Ethernet LAN Port, RJ45 (Data In)
- 1 x Gigabit Ethernet PoE LAN Port, RJ45 (Data+PoE Out)
- IEC-C13 Mains Power Socket
- 2 x Mounting Tabs
Compatible with
- VigorAP 918RPD
- VigorAP 920RPD
Data In & Data Out Port Data Rates
- 100Mb/s
- 1000Mb/s
Power Over Ethernet Specifications
- 56 Volts power output
- 1.1 Amp current
- 60 Watts total power output
- For use with VigorAP RPD models only
- Passive PoE Injector - Not IEEE 802.3af/at standards compliant
- RJ-45 PoE Pinout:
- Positive: Pins 1, 2, 4, 5
- Negative: Pins 3, 6, 7, 8
Power Specifications
- 100-240 VAC power input
- Up to 1.5 Amps current draw
- 60 Watts total power output
- IEC-C13 Mains power input
- For use with VigorAP RPD models only
- Passive PoE Injector - Not IEEE 802.3af/at standards compliant
Operating Requirements
- Indoor use / installation only
- Weight: 235 Grams
- Dimensions:
- Length: 170mm
- Width: 58mm
- Height: 41mm
Pack Contents
- DrayTek VigorPoE 600
- 2m IEC-C13 Mains power cable with UK plug
1 review for DrayTek POE600 POE injector for 918RPD
There are no reviews yet.